Factory Radio Replacement Interface for GM w/Onstar & Bose Retention PAC OS-2X

Description

PAC OS-2X Factory Radio Replacement Interface for GM w/Onstar & Bose Retention
Description
PAC OS-2X Factory Radio Replacement Interface for GM w/Onstar & Bose Retention
Description
The OS-2X interface allows the replacement of a factory radio in select General Motors vehicles with Class II radios. Using this interface will retain factory features such as OnStar, warning chimes, Rear Seat Controls (RSC), Rear Seat Entertainment (RSE) and the BOSE amplifier when the original radio is removed. The OS-2X also provides data bus driven outputs such as retained accessory power (RAP), vehicle speed sensor (VSS), illumination, reverse trigger and parking brake.
Product Features
Rear Seat Entertainment activation
Provides Plug-in-connection for SWI module (sold separately)
In-field updateable firmware via USB
Chime Module Included, with 4 level adjustability
Retains OnStar® when the factory radio is replaced
Retains Bose amplified audio system (if equipped)
Provides 10 Amp 12-volt accessory output
Retains all safety warning chimes
Navigation radio ready
Maintains a “healthy” status on the Class II databus
Retains Rear Seat Radio Controls
Retains Rear Seat Audio (connects to aftermarket radio aux input)
Plug-in installation for vehicles with 24-pin harness
Compatibility Notes:
The aftermarket radio must have an auxiliary input in order for the factory RSE audio to be retained through the cabin speakers.
RSC buttons that are identical to the SWC will mimic the SWC functon for function.
The interfaces accessory output is only rated at 10 amps. It is designed for the new aftermarket head unit ONLY.
For Bose systems, the recommended line level input is 2-4 volts from the aftermarket radio.
To prevent over driven audio when installing into a vehicle with a Bose system and the aftermarket radio does not have low level outputs then an LOC (part # LP3-2) is recommended to match the input voltage or you can create an audio attenuation circuit.
To prevent ground loop or engine noise when installing aftermarket radios that use a common ground on the outer shield of the low level outputs will require a ground loop isolator.
What You Will Receive
OS-2X Radio Removal Interface
Wiring Harnesses
CM1 Chime Module
General Installation and Operation Manual
Compatible with these vehicles:
Make
Model
Year
Buick
LaCrosse
2005-2007
Buick
Rainier
2004-2007
Buick
Rendezvous
2003-2007
Buick
Terraza
2005-2007
Cadillac
Escalade
2003-2006
Chevrolet
Avalanche
2003-2006
Chevrolet
Colorado
2004-2010
Chevrolet
Corvette
2005-2010
Chevrolet
Express
2003-2007
Chevrolet
Impala
2000-2005
Chevrolet
Malibu
2001-2003
Chevrolet
Monte Carlo
2000-2005
Chevrolet
S-10
2003-2004
Chevrolet
Silverado
2003-2006
Chevrolet
Silverado Classic
2007
Chevrolet
SSR
2003-2006
Chevrolet
Suburban
2003-2006
Chevrolet
Tahoe
2003-2006
Chevrolet
Trailblazer
2002-2009
Chevrolet
Uplander
2005-2009
Chevrolet
Venture
2003-2005
GMC
Canyon
2004-2008
GMC
Envoy
2002-2009
GMC
Savana
2003-2007
GMC
Sierra
2003-2006
GMC
Sierra Classic
2007
GMC
Yukon
2003-2006
Hummer
H2
2003-2007
Hummer
H3
2005-2008
Oldsmobile
Alero
2001-2004
Oldsmobile
Bravada
2002-2004
Oldsmobile
Silhouette
2000-2004
Pontiac
Grand Am
2001-2005
Pontiac
Grand Prix
2004-2008
Pontiac
Montana
2001-2006
Pontiac
Sunfire
2000-2005
Saab
9-7X
2008
Saturn
Relay
2007
***Only compatible with listed vehicles.***
WARRANTY
IMPORTANT
SHIPMENT
RETURN
WARRANTY
30 days return for full refund or brand new replacement (we pay the return shipping fee)
1 year warranty (After 30 days and within 1 year) for repair or replacement with refurbished item (buyers pay the return shipping fee)
IMPORTANT
Professional installation is highly recommended. Instructions are NOT included. Buyer assumes all risk on shipment and usage.
It is your responsibility to purchase the correct part.  Very often there is more than one part available per application as auto makers often switch midyear. eBay’s compatibility system does not allow sellers to account for any variations by VIN. If you don’t have the part number, you can get it from any dealership by providing your VIN. This way you can avoid unnecessary hassle and return shipping costs. We provide part numbers and high resolution photos, but if you do not check them we cannot guarantee fitment.
We can only be responsible for the damage and defective of our products.
We cannot reimburse for any loss in any other parts of your car or labor cost.
SHIPMENT
99% OF ORDERS BEFORE 3:00PM PST ARE SHIPPED OUT THE SAME DAY!!!!!!!
Shipment by USPS and UPS only
Shipment from Los Angeles warehouse
Tracking number can be found in your order. Please allow 1 business days to have the tracking number upload in your order
Double check the address in your order before placing an order. Address changing requirement will charge extra
(Address Change: Search “USPS package intercept or UPS package intercept”online, and follow the instructions on USPS or UPS website)
Trying to canc
el an order but failed, please contact us through eBay message to get an instruction on how to return the item for refund.
Keep closely tracking your package, especially near the day delivery. Check with the mail person ASAP when your tracking shows delivery but you don’t receive any package. We are not responsible for any package lost issue with tracking showing delivery.
RETURN
Order within 30 days: open an return request in your order.
Order over 30 days: please contact us by ebay message so that we can provide return instruction to you
All exchange items MUST be in brand new condition which means the item is never installed and kept in the original packaging.
We can only replace or refund after we receive the returned item.
Please be sure to ship the item we sold back to us for return. Any returned items which are not sold by us will not receive refund or replacement.
© 2017 Clearance.  All rights reserved.